Floor wrong collision while leaving sittingmod

If you feel like you're up to the challenge of building your own Ages in Blender or 3ds Max, this is the place for you!

Floor wrong collision while leaving sittingmod

Postby Maroonroon » Thu Oct 19, 2017 2:09 pm

Hello;
I have a chair I can sit on and it works well,
but while I leave it, at the end of the "standing up" avatar animation, the avatar falls down through the floor (around one shoe's height under the floor collider),
and then, if I walk, the avatar falls down through the "ghost" floor (around half an avatar's height under the floor collider).
Any idea?

- The floor collider have Triangle Mesh Bounds
User avatar
Maroonroon
 
Posts: 219
Joined: Sun Jul 06, 2014 5:03 pm
Location: France

Re: Floor wrong collision while leaving sittingmod

Postby dendwaler » Thu Oct 19, 2017 2:29 pm

Bring the center of your sitting box in line with its bottom face.
(Select bottom face and then set the center using "shift S"cursor to selected . and after that set origin to 3d cursor"
Now place your box slightly above the floor. if the box is to high or to low , you can scale it again in z direction without the need to replace or adjust the place because the bottom will stay where it is.
That will do it.
Those wonderfull Worlds are called " Ages" , because that is what it takes to build one.



Watch my latest Video Or even better..... watch the Cathedral's Complete Walkthrough made by Suleika!
User avatar
dendwaler
 
Posts: 936
Joined: Mon Jun 22, 2009 10:49 am
Location: Nederland

Re: Floor wrong collision while leaving sittingmod

Postby Maroonroon » Thu Oct 19, 2017 5:16 pm

Thanks for your message, dendwaler; but the problem wasn't there.
In fact, there's a wall in front of the chair, and the wall was too close to the chair (0.06 units)...
I moved the wall from 3.94 units away the chair, to 4 units, and it works. :)
User avatar
Maroonroon
 
Posts: 219
Joined: Sun Jul 06, 2014 5:03 pm
Location: France


Return to Building

Who is online

Users browsing this forum: No registered users and 3 guests