Gehn.7 Live!

Announcements and discussion regarding the Gehn CWE Shard.

Moderator: Gehn Shard

User avatar
Deledrius
Gehn Shard Admin
Posts: 1377
Joined: Mon Oct 01, 2007 1:21 pm
MOULa KI#: 23298

Re: Gehn.7 Live!

Post by Deledrius »

I can confirm this.

The imager buttons show no symbols, Yeesha's hologram cleft book is sitting next to the imager.

Edit: We've identified the problem and a solution is being devised.
Ron Landry
Posts: 69
Joined: Fri Feb 10, 2012 4:19 pm
MOULa KI#: 10215645
Location: Germany

Re: Gehn.7 Live!

Post by Ron Landry »

Deledrius wrote:I can't say for certain this is the root of the problem, but it would be in your best interests to upgrade to SP3 if at all possible.
Oh dear. I'm working on it.

Gehn is the first software on my system which seems to need SP3 definitely -- and I have a pretty bunch of installed applications.
... and so I close realising that perhaps ... the ending ... has not yet been written.
returned to the cavern as
MOULa KI#10215645 Ovaron / Gehn Shard KI#582269 Ovaron2
User avatar
Branan
Gehn Shard Admin
Posts: 694
Joined: Fri Nov 16, 2007 9:45 pm
MOULa KI#: 66990
Location: Portland, OR

Re: Gehn.7 Live!

Post by Branan »

Unfortunately, SP3 might not be enough.

In Gehn.7 we started updating a lot of the math to use modern processor features*. We added a check that's supposed to abort on old processors. Unfortunately, without any of us devs having an old enough machine to test on that check might actually not be working.

I'd suggest you grab CPU-Z and paste the "Instructions" line here. That will help let us know whether we have a bug in our detection routine, and it'll let you know if your processor is too old to play our fancy modern URU.

* By "modern" we mean "introduced in 2004". We felt this struck a good balance between supporting older systems and giving us as developers the opportunity to improve the game.
Image
Your friendly neighborhood shard admin
User avatar
semplerfi
Posts: 119
Joined: Sun Sep 30, 2007 6:55 pm
MOULa KI#: 223462
Location: Lakewood, Washington
Contact:

Re: Gehn.7 Live!

Post by semplerfi »

Hope these help. They were all available in 2004. ;)

2.2GHz Pentium 4 Northwood SEE2 768MB
Processor: 1 Intel Pentium 4 CPU 2.20GHz [x86 Family 15 Model 2 Stepping 4]
Processor features: fpu tsc sse sse2 mmx

3.6GHz Pentium 4 560 Prescott HT SSE3 2GB RAID0
Processor: 2 Intel Pentium 4 CPU 3.60GHz [x86 Family 15 Model 4 Stepping 1]
Processor features: fpu tsc pae nx sse sse2 see3 mmx

3.8GHz Pentium 4 670 Prescott HT SSE3 EM64T 3GB RAID0
Processor: 2 Intel Pentium 4 CPU 3.80GHz [x86 Family 15 Model 4 Stepping 3]
Processor features: fpu tsc pae nx sse sse2 see3 mmx em64t
johnsojc
Posts: 246
Joined: Sun Dec 07, 2008 10:27 am

Re: Gehn.7 Live!

Post by johnsojc »

So it might not be the O/S that is the limitation... it could be the processor chip that is the problem. (?)
User avatar
Branan
Gehn Shard Admin
Posts: 694
Joined: Fri Nov 16, 2007 9:45 pm
MOULa KI#: 66990
Location: Portland, OR

Re: Gehn.7 Live!

Post by Branan »

johnsojc wrote:So it might not be the O/S that is the limitation... it could be the processor chip that is the problem. (?)
We now require a processor that supports SSE3. Some (very low end) processors sold after 2004 will be missing this feature, but most systems from 2004/2005 onward should be compatible.

For Intel: Any Core-series or any Pentium 4 after Prescott.

For AMD: Any Phenom or Athlon II, or an Athlon after E4.

If you have a Pentium-4 or Athlon branded chip, you should check a program like CPU-z to find out if you support SSE3. I'll try to fix the detection routine inside URU so that it will properly alert you when your processor is too old, rather than crashing.
Image
Your friendly neighborhood shard admin
User avatar
Deledrius
Gehn Shard Admin
Posts: 1377
Joined: Mon Oct 01, 2007 1:21 pm
MOULa KI#: 23298

Re: Gehn.7 Live!

Post by Deledrius »

I just barely qualify. Yay!
Tsar Hoikas
Councilor of Technical Direction
Posts: 2180
Joined: Fri Nov 16, 2007 9:45 pm
MOULa KI#: 23335
Location: South Georgia
Contact:

Re: Gehn.7 Live!

Post by Tsar Hoikas »

My grandmother's PC qualifies... 8-)
Image
Ron Landry
Posts: 69
Joined: Fri Feb 10, 2012 4:19 pm
MOULa KI#: 10215645
Location: Germany

Re: Gehn.7 Live!

Post by Ron Landry »

Branan wrote:I'd suggest you grab CPU-Z and paste the "Instructions" line here. That will help let us know whether we have a bug in our detection routine, and it'll let you know if your processor is too old to play our fancy modern URU.
Ok, thanks Branan. I've installed that tool. The instruction line shows: "MMX(+), 3DNow(+), SSE".
Branan wrote:By "modern" we mean "introduced in 2004".
Processor Type: AMD Athlon XP, which was produced until 2004. And this seems to be too old.
Well, I like to play ;) prehistoric games like Myst :shock: with prehistoric :D hardware..
Johnsoic wrote:So it might not be the O/S that is the limitation... it could be the processor chip that is the problem. (?)
It looks like that is the case.
Last edited by Ron Landry on Fri Apr 20, 2012 3:21 am, edited 1 time in total.
... and so I close realising that perhaps ... the ending ... has not yet been written.
returned to the cavern as
MOULa KI#10215645 Ovaron / Gehn Shard KI#582269 Ovaron2
Ron Landry
Posts: 69
Joined: Fri Feb 10, 2012 4:19 pm
MOULa KI#: 10215645
Location: Germany

Re: Gehn.7 Live!

Post by Ron Landry »

Branan wrote:If you have a Pentium-4 or Athlon branded chip, you should check a program like CPU-z to find out if you support SSE3. I'll try to fix the detection routine inside URU so that it will properly alert you when your processor is too old, rather than crashing.
Oh yeah, its a good idea, if the launcher would detect and alert about a too old CPU. If you fix this URU inside routine, I will give you feedback, if it works or not. As I wrote, I'm using an AMD Athlon XP, produced until 2004 with SSE-Support, that is obviously not SSE3. Seems definitely as if I NOT have detected a hidden malfunction of Gehn.7 Live!, but a lack of hardware on my side. :lol: Good for Gehn :lol: (bad for me :roll: :evil:).
Tsar Hoikas wrote:My grandmother's PC qualifies...
Good 4 your grandma. It may be not prehistoric enough. :D
... and so I close realising that perhaps ... the ending ... has not yet been written.
returned to the cavern as
MOULa KI#10215645 Ovaron / Gehn Shard KI#582269 Ovaron2
Post Reply

Return to “Gehn Shard”